19
www.magmaweld.com
USER MANUAL | KULLANIM KILAVUZU
ID 250T DC / ID 300T DC
EN
Parameter Adjustment Pot
It is used to set the welding parameters to the desired value.
Digital Display
It shows the numerical value of the selected welding parameter and the current value during welding.
It also shows error message in case of error.
Program Selection Button
It is used to select one of 10 work programs covering all parameter settings in TIG modes. Thanks to
the programs, the adjusted parameters are kept in the memory of the machine and can be used for
repetitive jobs, selected by the user. The last settings made for the selected program number will be
saved automatically, no further action is required for recording. In addition, while still in TIG modes,
it allows to switch to the cooling time setting when pressed for 3 seconds.
Digital Program Display
Shows the program number selected with the program selection button. It also shows the letter C
when setting the cooling time.
Welding Mode Selector Button
It is used to select one of the MMA welding, HF ignition TIG welding and Touch Start TIG welding
modes.
6
Led lights up when MMA welding mode is selected.
7
Led lights up when HF ignition TIG welding mode is selected. In this mode, when the electrode is
approached without touching the workpiece, the arc starts with a voltage jump over the gas.
8
Led lights up when Touch Start TIG welding mode is selected. In this mode, arc starts when the
electrode touches the workpiece and is pulled.
1
2
3
4
5
3.1 User Interface
OPERATION
Operation
