18
www.magmaweld.com
USER MANUAL | KULLANIM KILAVUZU
ID 250T DC / ID 300T DC
EN
• Start the machine with the on/off switch and check whether the leds are on and the cooling fan is working.
• Connect the electrode clamp cable plug
(c)
and the grounding clamp cable plug
(a)
to the welding and ground
cable sockets according to the electrode to be used and the polarity recommended by the electrode manufacturer.
• To improve the welding quality, firmly connect the grounding pliers
(b)
to the workpiece as close as possible to
the welding area.
2.6 Connections for (MMA) Welding
Check for the correct mains voltage before connecting the machine to the mains.
When plugging the power plug into the outlet, make sure that the power switch is set to “0”
in the turned-off position.
Covered
“mm”
Recommended Welding Current
Rutile
2.0
2.5
3.25
4.0
40-60 A
60-90 A
100-140 A
140-180 A
-
60-90 A
100-130 A
140-180 A
-
60-100 A
70-130 A
120-170 A
Alkaline
Cellulosic
a
b
c
Installation
