Magmaweld ID 300 E, User Manual

Page: 15 / 68

EN
15
www.magmaweld.com
ID 300 E
USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
When inserting the plug into the wall socket, the machine Make sure
it is in the “0” position.
2.6 Connecting to the Mains
• Check the 3-phase with a voltmeter before connecting the machine to the mains.
After detecting that each phase is 400V (± 40V), plug in the plug.
• Switch on the machine with the On / Off switch.
• Turn off the machine by turning the switch back to the “0” position after hearing the
fan noise and seeing the voltmeter and ammeter light on.
Figure 6 :
Mains Connection
Installation