1-800-MAGLINE (624-5463)
Page 17 www.magliner.com
CooLift
®
Battery Meter Operating Instructions
• Battery meter will show the charged state of the battery whenever the main power switch is
turned ON
• During normal operation, the charged state of the battery is indicated by the number of bars
displayed on the meter
• Full charge is 10 steady bars
• A partial charge is two to nine steady bars
•
A low battery is two alternately flashing bars
• While the battery charger is plugged in and charging the battery, the display will repeatedly
scroll across the bars up to the level of charge in the battery
• Full charge is indicated by scrolling across 10 bars
• A partially charged battery is indicated by scrolling across two to nine bars
• When the main power switch is OFF, the battery meter will not display
Error LED Indicators
Solid - Charger is in Standby mode or battery voltage is to low for
charger to detect.
Solid - Battery voltage is too high for the selected charge mode. Check
the battery and charge mode.
Solid - Possible battery short / battery will not hold a charge. Contact
Magline.
Solid - Reverse polarity. Reverse the battery connections.
Flashing - Charger internal temperature too high - Charger will resume
function once the charger internal temperature drops, OR
Charger ambient temperature too cold - Charge will resume function
once the charger ambient temperature rises.
