1-800-MAGLINE (624-5463)
Page 31 www.magliner.com
CooLift
®
D
E
H
F
G
Item
Qty. Part No.
A Hex socket head cap screw -
5/16”-18 x 1” long
8
80011
B Frame top brace
1
309445
C Frame bottom brace
1
309614
D
Differential assembly
1
309622
E Reinforcement plate
2
309444
F Hex socket cap screw - 3/8”-16
x 1-1/4” long
8
80132
G Hex lock nut - 3/8”-16
8
80603
H
Differential mount assembly
2
309681
H
Hex head cap screw - 5/16”-18
x 4-1/4” long
4
80134
I
Differential drive sprocket
1
309442
J
Hex lock nut with flange -
5/16”-18
4
80627
I
J
K
25) Tighten the two #10-32 screws and lock nuts found on the clutch anti-rotation bracket and top diagonal brace.
26) Adjust the outer screws on the motor adjustment plates until the chain has 1/4” of play between the two sprockets.
Make sure that the motor adjustment plates are the same distance apart from the differential mount block (see page
27). Tighten the jam nut on the motor adjustment plate.
27) Fully tighten the hex head cap screws on motor and clutch adjustment plates.
28. Replace the drivetrain cover. Plug the lift motor into the controller. Reconnect the batteries.
29. Turn on the unit.
Carefully test propulsion to make sure the CooLift drives in the intended direction.
A
C
B
A
E
Reinforcement plate needs to be moved inward or
rotated to be removed from the frame rail “lip.”
BE CAREFUL once these are removed as these plates
support the differential assembly! Use two people for
easier removal.
RH (standing behind
CooLift at the user
handles)
LH (standing
behind CooLift at
the user handles)
