![background image](http://html1.mh-extra.com/html/magio/mg-267/mg-267_instruction-manual_3521716027.webp)
27
EN
Fig.1
Fig.2
2. Insert the screw (8) into the
removable operating unit and
rotate it until the screw locks into
place (fig 2). If the screw is not
installed correctly, it will not rotate.
3. Slide the crossed blade (9) onto
the screw with the cutting edge
facing outward.
4. Following the blade, slide the
cutting plate (10) onto the screw
with the correct size. Make sure,
the notches on the removable
cutting unit match the notches on
the rack.
5. Install and tighten the ring nut (11) without overtightening it.
6. Install the removable tray (3) onto the loading neck of the
operating unit.
7. Place the meat grinder on a flat, stable surface.
»
Make sure the edge of blade toward the blade disk when
assembling. Never assemble the blade reversely.
»
Do not cover the ventilation hole on the body of the unit
during operation and do not place it on a soft surface, as this may
cause the overheating of the motor.
Note:
»
The accessory storage container
(2) is located in the pusher.
Open the lid to take out or hide the nozzles.
Attention!
Summary of Contents for MG-267
