Magio MG-267, Instruction Manual

Page: 26 / 31

26
EN
• Do not overload the meat grinder tray with food.
• Before using the device, make sure that all parts are installed
correctly.
• Unplug the appliance and unplug it before changing accessories
or when approaching moving parts.
• Do not put your fingers or objects other than the pusher in the
neck of the removable work unit while operating.
• Do not push products with excessive force.
Before first use
Assembly
»
The duration of continuous operation should not exceed 7
minutes. Take a break between work cycles, at least 10 minutes.
» Keep the appliance dry.
»
The meat grinder is not suitable for chopping nuts, foodstuffs
with hard fibers (for example ginger or horseradish), or for processing
meat with bones.
Before assembling and installing the nozzles, make sure that
the unit is not connected to the power supply.
After transportation or storing the device at low temperature, keep
it at room temperature for three hours at least.
1. Check the integrity of the appliance, if damaged, do not use the
appliance.
2. Remove any stickers and packing materials that interfere with
the operation of the appliance.
Unpacking
1. Rinse all removable parts that will contact with the food with
warm water and detergent, dry them thoroughly.
2. Wipe the body with a soft, slightly damp cloth.
1. Install the removable operating unit (7) into the slot on the body.
- Lock the work unit to the left counterclockwise until you hear
a click.
- Press the lock button (4) with thumb of one hand (fig.1).
- Hold the operating unit with the other hand, insert it into the
hole of the main machine.
- Turn it anti-clockwise until it cannot move any longer.
- Release the lock button, the operating unit is fixed on the meat
grinder body.
Attention!