8
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: IPC-100 AC
PRODUCT CODE: 91838
12/2014
4.3. Assembly of IP Security Camera
Using the supplied wall fixing, the IP Security Camera can be installed at a fixed location.
Note:
• Do not place IP Security Camera directly next to electronic devices as this could produce interference. In case of
picture interference, test camera at another location.
• Select the installation site for the IP Security Camera so that the lens is not exposed to sun light.
4.3.1. Install wall fixing
Hold the plate of the wall fixing containing holes against the surface of the selected installation site and mark the holes on
the surface, using a pencil.
To drill suitable holes, use a 6 mm masonry drill for dowels in stone or concrete surfaces or a 3 mm wood drill for timber
surfaces. After drilling the holes insert supplied wall plugs into holes so that they are flush with the surface. Secure wall
fixings with supplied bolts.
4.3.2. User data supplied with camera
Place the tripod socket of the IP Security Camera on the mounting plate of the wall bracket and screw the camera with the
tripod screw. Align the IP Security Camera as desired.
4.3.3. Complete camera assembly
Connect the supplied mains unit first into the IP Security Camera, then you can connect it into the socket.
