43
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: IPC-100 AC
PRODUCT CODE: 91838
12/2014
Region:
Depending on the region, WiFi does not support various channels. Select the region in which the IP Security
Camera will be used from the “Region” option.
Encoding:
Data in wireless networks are in most cases transmitted encoded to prevent third party access. State what type
of encoding is used in your WiFi network.
When
“Uncoded“
is selected, data are not encoded prior to transmission.
When using
“WEP“
,
“WPA“
or
“WPA2“
encoding, additional encoding information must be provided. Enter the same settings
as shown for the router or access point.
Note:
• Enter wireless network settings without changing. This is the only way to ensure the correct connection of the IP
Security Camera.
• Also, general settings of the router or access points should not be changed where this is not required. Otherwise this
could result in problems with other WiFi devices in the network.
Use the
“
Search“ function to start an automatic search of existing wireless networks. Select the desired WiFi network from the
list by marking it under “Selection” and click on
“
Use
“
. Where encoding data is required for the selected network, these must
still be entered.
Click on “Apply“ to accept the changed settings. Next, restart the IP Security Camera to accept the wireless settings changes.
The restart takes about 2 minutes.
