9
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: IPC-100 AC
PRODUCT CODE: 91838
12/2014
5. Installation of IP Security Camera
5.1. Hardware installation
In order to carry out the first settings in the IP Security Camera, the network cable must be connected to the router. A wireless
connection via WiFi is only available once this has been set up in the IP Security Camera using the cable connection.
Plug the supplied network cable into camera and router as shown in the illustrations.
The network connection of the IP Security Camera contains two control LEDs.
•
Yellow:
Indicates that network activity is taking place.
• Green:
Indicates that the IP Security Camera is connected to a network.
Note:
• If your router does not contain a port for connecting the network cable, the IP Security Camera can also be set up
without a router.
• For this purpose deactivate all networks existing on your computer and plug the network cable of the IP Security
Camera directly into the computer. You can also access the IP Security Camera via the program
Maginon IPCam
Config
(see section 5.4).