Page 20
5. Place the
G
and
E
driftwood pieces as
shown in
Figure 38
then place the
C
and
D
pebbles
(
G
driftwood is not
marked)
.
6. Next
place
the
B
,
J
&
K
driftwood pieces
as in
Figure 39
.
7. Continue laying the pebbles and the
driftwood pieces as shown in
Figure 40
and
Figure 41
.
8. After the appliance has been allowed to
warm up, small adjustments (using a
small pair of tongs) may be made to the
top layer to achieve the desired flame
picture.
9. It is recommended that the pebbles and
driftwood be left alone once the desired
flame pattern has been achieved.
Constant moving of the pebbles and
driftwood causes them to disintegrate
and/or cause discolouration
.
WARNING:
Do not touch the
fire when it is alight. The fire
will remain very hot for a while
after extinguishing.
Some sooting on the fuel effect
may be observed. This is
perfectly normal. Periodically
operating the fire at various
rates will burn this soot away. If
excessive sooting is observed,
this is an indication that the fuel
bed is laid incorrectly – please
refer to instructions.
C
D
G
E
Figure 38
B
K
J
Figure 39
A
K
B
F
A
Figure 40
J
J
E
E
E
C
A
Figure 41
Summary of Contents for Ekos 16"
