Magiglo ARIA, User, Installation & Servicing Instructions

Page: 7 / 56

Page 3
1.1.
0B
Important Note About ODS Pilot
This fire is fitted with an ODS pilot which causes the appliance to shut down in the event of a
reduction of oxygen (e.g. caused by poor ventilation) in the room. Should this happen, follow
the lighting instructions to re-light the fire. In the event that the fire should shut down again,
do NOT attempt to re-light it but contact your gas installer for remedial action to be taken.
Under no circumstances should it be adjusted or put out of action by the installer
or the user. In case the pilot needs replacing, only the approved part (listed in the
spare parts list) should be fitted. Note: if any part of the pilot assembly becomes
faulty the complete assembly will need replacing.
1.2.
1B
Fire Fret Dimensions
All models can be used with the Burley Magiglo range of frets or any other fire fret that
falls within the dimensions shown below
Minimum opening
(free air) in fire fret
Minimum opening
(free air) in ash pan cover
Figure 1
Fire Front Specification
16” Model 18” Model
Height to Centre (A) Maximum 9 Inches (23cm) 9 Inches (23cm)
Minimum 7.5 Inches (19cm) 7.5 Inches (19cm)
Ash Pan Cover Height (B) Maximum 3.5 Inches (9cm) 3.5 Inches (9cm)
Minimum 2.5 Inches (6.4cm) 2.5 Inches (6.4cm)
Ash Pan Cover Free Air Opening Minimum 5 sq. Inches
(32.3cm
2
)
5 sq. Inches
(32.3cm
2
)
Fire Fret Free Air Opening Minimum 15 sq. Inches
(97cm
2
)
18 sq. Inches
(116cm
2
)
Ash Pan Cover Length (C) Maximum 13.5 Inches (34cm) 15.5 Inches (40cm)
Minimum 12.5 Inches (32cm) 14.5 Inches (37cm)