Magiglo ARIA, User, Installation & Servicing Instructions

Page: 33 / 56

Page 29
3.8.
17B
Installation Procedure
Before commencing installation, ensure that the intended installation will comply
with details in
X
General Information
X
on Page
X
1
X
.
Carefully unpack the contents of the carton and check them against the checklist given on the
previous page.
Make sure that the fireplace opening is suitable for the installation of the fire and prepare the
fireplace to suit the dimensional requirements given in sections
X
3.3
X
,
X
3.4
X
and
X
3.5
X
(i.e. fitting the
fire surround, the hearth, etc.).
WARNING: Do not handle the ceramic fireback at any time.
3.8.1.
45B
Preparing the Firebox
1. Remove the two tray fixing screws from
the bottom of the fire tray (see
diagrams).
2. Gently pull out the fire tray from the
firebox and put it safely aside for later
use.
TRAY
FIXING
SC REW
TRAY
FIXIN G
SCREW
PRESSURE
TEST
POINT C ONTROL
VALVE
PILOT
FIXING
SC REWS
GAS INLET SLOT
COVER
GROMMET
Figure 45 - Manual BM Control
TR AY
FIXING
SCREW
TRAY
FIXING
SCR EW
CONTROL
VALVE
GAS IN LET SL OT
C OVER
GAS
INLET
RECEIVER/
BATTERY
PACK
PILOT
FIXING
SCREWS
HEAT
SHIELD
POWER
SUPPLY
PLUGS
GROMMET
PRESS.
TEST
POINT
Figure 46 - Remote, Optimum,Trim Switch & Total Control