16 MAGICFX® SWIRLFAN II
—
User and Installation Manual
3.3
CONNECT POWER AND SETUP DMX
PowerCon TRUE1 female
POWER
5-pole female
DMX
POWER IN
POWER OUT
DMX IN
DMX OUT
1.
Connect a power cable with a Powercon TRUE1 Female connector to the
power input.
2.
Connect the other end of the power cable to a 180 – 250 Vac (50 – 60 Hz)
power source.
3.
Connect the female connector of a 5-pole DMX cable to the DMX input.
4.
Connect the other end of the DMX cable to your DMX controller.
5.
Power up the machine.
6.
Use the display and buttons or a RDM controller to assign DMX addresses, see
Chapter 1.
7.
Optionally see Section 3.7 for adding more machines to the same sequence.
CAUTION
Always plug in a DMX Terminator into the DMX output. Using a
DMX Terminator improves signal reliability.
Summary of Contents for SWIRLFAN II
Page 1: ...SWIRLFAN II CONFETTI FX PART01661 rev 01 01 USER AND INSTALLATION MANUAL ENGLISH...
Page 22: ......
Page 23: ......
Page 24: ...WWW MAGICFX EU...
