background image

MAGICFX® SWIRLFAN II 

 

User and Installation Manual

  9

Menu function Explanation

Lock/Unlock 

Controller

Holding the Lock button for more than 5 seconds will “lock” the 

display functions. Meaning buttons will not respond. This to avoid 

accidental change of parameters via display.To unlock, hold the 

Unlock button for more than 5 seconds.  

Reset Errors

In case there is a locking error present, this button will reset the 

appliance. If the fault does not persist, the locking error will not 

reappear.

DMX Start 

Address (1-512) Setting the DMX start address.
DMX Safety 

Address (1-512) Setting the DMX safety address.

DMX Footprint

This parameter indicates the DMX footprint, in other words the 

amount of sequential channels used by the appliance. This does 

not include the safety channel.  

Display Dimmer 

(On/Off)

Turn display dimmer on or off. If turned on, the display is dimmed 

automatically 30 seconds after the last button push.

Factory 

Defaults (Yes/

No)

Restores the appliance factory default settings.

Type (Alarm/

Error)

Toggle between the occured locking error (Alarm) list, and 

blocking error (Error) list. Locking errors need intervention by user, 

although they are “auto-reset” 3 times before the appliance 

remains in error until reset by user. Blocking errors clear when the 

triggering fault disappears. 16 locked, and 16 blocked errors are 

logged. Top of the list shows the last occurring error.   

Serial Number 

(DDDDD)

Appliance serial number as also printed on the appliance label.

Unique ID 

(HHHHHHHHHHHH)

UID number as the appliance appears in the RDM device list after 

running discovery.

Software 

Version

Installed software version.

Software CRC

CRC of the functional software.

Bootloader 

CRC

CRC of the bootloader software.

Build Date

Release date of functional software.

Up-Time 

(DDDD:HH:MM:SS)

Time counter which indicates how long the appliance has been 

powered in total.

Effect-Time 

(DDDD:HH:MM:SS)

Time counter which indicates how long the effect has been activated 

in total.

Summary of Contents for SWIRLFAN II

























Reviews: