MAGICFX® SWIRLFAN II
—
User and Installation Manual
17
3.4
SETUP MULTIPLE MACHINES IN A SEQUENCE WITH DMX
PowerCon TRUE1 female
5-pole female
PowerCon TRUE1 male
5-pole male
POWER
DMX
POWER IN
POWER OUT
DMX IN
DMX OUT
POWER IN
POWER OUT
DMX IN
DMX OUT
1.
Connect a power link cable to the power output.
2.
Connect the other end to the power input of the next machine.
3.
Connect a DMX cable to the DMX output.
4.
Connect the other end to the DMX input of the next machine.
5.
Power up the machine.
6.
Use the buttons or a RDM controller to assign DMX addresses, see Chapter 1.
7.
Repeat step 1 – 5 for each subsequent machine.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
Summary of Contents for SWIRLFAN II
Page 1: ...SWIRLFAN II CONFETTI FX PART01661 rev 01 01 USER AND INSTALLATION MANUAL ENGLISH...
Page 22: ......
Page 23: ......
Page 24: ...WWW MAGICFX EU...
