![background image](http://html1.mh-extra.com/html/magicfx/sparxtar-spark-fx/sparxtar-spark-fx_user-and-installation-manual_3500540020.webp)
20 MAGICFX® SPARXTAR
—
User and Installation Manual
3.4
CONNECT POWER AND SETUP DMX
PowerCon TRUE1 female
POWER
5-pole female
DMX
POWER IN
POWER OUT
DMX IN
DMX OUT
1.
Connect a power cable with a PowerCon TRUE1 female connector to the power
input.
2.
Connect the other end of the power cable to a 220-250Vac (50-60Hz) power
source. The machine starts heating and the fan starts blowing.
3.
Connect the female connector of a 5-pole DMX cable in the DMX input.
4.
Connect the other end of the DMX cable to your DMX controller.
5.
Use the display and buttons or a RDM controller to assign DMX addresses, see
Chapter 1.
6.
Optionally see Section 3.5 for adding more machines to the same sequence.
NOTICE
Always plug in a DMX Terminator into the DMX output. Using a
DMX Terminator improves signal reliability.
Summary of Contents for SPARXTAR SPARK FX
Page 1: ...SPARXTAR SPARK FX PART01213 rev 01 01 USER AND INSTALLATION MANUAL ENGLISH...
Page 27: ......
Page 28: ...WWW MAGICFX EU...