background image

 

5

 

Remote Arm 

To arm the system, exit the vehicle and close all doors, just press button (1) once. The siren will chirp once and the 
Parking lights flash once. Then, the doors will be locked and starter kill will be On and Armed.   
Now the system is ready to respond if intrusion attempts are detected.     
 
If the doors, trunk or hood is opened, or the first stage shock senor is triggered, the siren will chirp three times and the 
parking lights flash three times at the same time. The violated zones will be by-passed and the system enters into the arm 
mode. 
 

Remote Disarm   

To disarm the system, just simply press button (1) once while the system is armed. 
The siren will chirp twice and the parking lights flash twice at the same time. 
If trigged while the system is armed, the siren will chirp 4 times and the parking lights flash 4 times. 
     

Enhanced System Alerts 

To protect your vehicle, the system will emit the different alert under the various situations. 

a)  Pre-warn sensor (first-stage sensor) triggered: Light impact will activate the pre-warn sensor.  Remote 

transmitter will sound the three short chirps with impact icon display.   

b)  Shock sensor (second-stage sensor) triggered: Heavy impact will activate the second-stage sensor. The parking       
        lights will flash and siren sound for one cycle (30 or 60 seconds based on the programmed default).   
c)  Ignition on: Siren will sound until the ignition is off.     
d)  Door open and then closed: The parking lights will flash and siren sound for one cycle (30 or 60 seconds).   
e)  Door open and not closed: Siren will sound for three cycles (siren will stop for 5 seconds and sound again for next 

cycle). Door sensors will be bypassed until they are closed.     

f)  Hood or trunk open and then closed: The parking lights will flash and siren sound for one cycle (30 or 60 

seconds).  

g)  Hood or trunk open and not closed: Siren will sound for three cycles (siren will stop for 5 seconds and sound 

again for next cycle). Hood or trunk switches will be bypassed until they are closed.     

h)  Alarm triggered: Press button (1), siren will chirp once, door lock and the system is still armed.    Press button (1) 

once again, siren will chirp four times, doors unlock, start kill off and LED off or flashes rapidly.   

 

Panic Mode 

Use this mode conveniently when you are in a situation to warn away the intruders.   
a)  Under the disarm mode, press button (1) 2 seconds.   
The doors will be locked, starter kill on, lights flash and siren on. The system will be armed after the siren is off. 
b)  Under the arm mode, press button (1) 2 seconds. 
The parking light will flash and siren will sound. The system will remain armed.   
c)    Under the ignition on, press button (1) 2 seconds. 
The parking lights will flash and siren sound. After the ignition is off, starter kill will be on and armed. 
 

Trunk Release 

Press and hold button (2) 2 seconds either the system is armed or disarmed, trunk will be released. 
 

Car Finder 

a) Press button (3) once either the system is armed or disarmed, the parking lights will flash 30 seconds.     
b) Press either button (1), (2) or (3) while the system is under this mode. Siren will chirp once and the parking lights flash 

once, and then the system will be armed if under disarmed before.   

 

Mute Arm Mode 

From the disarm mode, Press button (1) and (2) simultaneously, lights will flash once, then press button (1) once again 
within a second. (LCD TX chirps one long sound, display mute and lock icon.) 
 
a) Warn away sensor triggered: siren will chirp three times and send triggered signal to the remote transmitter in order to 

inform that the vehicle is impacted lightly. 

b) Second-Stage Shock Sensor triggered: The parking lights will flash, but siren will not sound.    The lights will be off 

after flashing one cycle and the system will remain still under the mute arm mode.     

c) Ignition Trigger (when ignition is on): The parking lights will flash and siren sound.  Lights and siren will stop   

www.shieldtechsecurity.com

Summary of Contents for FAI-8100













Reviews: