background image

 

2

Introduction 

The Magicar FAI-8100 is the unique Auto Security Remote Start System incorporated with Super FM Paging Circuit, 
designed to provide you with the highest level of security for your vehicle and convenience for your auto life.   
Thanks for the two-way interactive communications system built in, a small palm size LCD remote transmitter will report 
you instantly through the audible alert and visual icon display if detected for the violated zones on your vehicle such as 
impact, door open, hood open, truck open as well as the ignition on.   
     
The Magicar FAI-8100 has many functions you can choose from to customize your needs. 
So read this owner manual carefully before you operate the Magicar FAI-8100 system.   
 

Features 

1.  1 Two Way LCD Remote Transmitter and 1 one way 2

nd

 remote 

2.  Code Hopping and Code Learning Remote System 
3.  Up to 4 LCD remote transmitters Programmable 
4.  Remote Engine Start 
5. Remote 

Arm/Disarm 

6. Mute 

Arm/Disarm 

7.  Starter Kill (500mA negative output) in arming mode 
8. Remote 

Trunk 

Release 

9.  Passive or Active Lock Programmable 
10. Auto Re-arm 
11.  Lock/Unlock on driving 
12.  Silent Car Searching 
13.  Vibrate or Audible Alert 
14.  LCD Back Light Display 
15.  Low level of Battery Indicate 
16.  Audible Intrusion Zone Identification 
17.  Defective Zone Alert and By-pass 
18.  Back-up Memory for the Battery Power Failure       
19.  Keyless Entry While Ignition is on 
20. Remote Panic 
21.  Remote Hijacking – Keeping Engine on. 
22.  Emergency System Override 
23.  Remote Valet Mode 
24. Last Door Arming 
25.  Siren Chirp programmable for 30 or 60 seconds   
26.  Built-In Actuators Relay 
27.  Tach or Tachless Sensing 
28.  Central Lock Active Time selectable 0.5 or 3.5 seconds 
29.  Plug-In Dual Stage Shock Sensor 
30. Pre-warn away 
31. Shock Sensor By-pass 
32. Vehicle Status Report 
33.  Triggered Report by chirp when disarmed 
34. Ignition Auto Lock/Unlock 
35.  Siren or Horn selectable 
36.  Dome Light Delay Time programmable 
37.  24hr Engine start   

 

 
 
 
 
 
 
 
 
 
 
 

www.shieldtechsecurity.com

Summary of Contents for FAI-8100













Reviews: