Maggi 16430201, Original Use And Maintenance Manual

Page: 9 / 56

1) To operate the machine safely and correctly, follow the indications contained in this manual carefully and
scrupulously.
2) The machine will have to be operated only by personnel who is both qualified and over 18. People responsi-
ble for safety should make sure that the machine operator has read and fully understood all the information
contained in this manual.
3) Maintenance interventions must be carried out only by personnel who is both qualified and over 18.
4) Personnel responsible for routine and extraordinary servicing must have a good knowledge of mechanics
and electronics.
5) Keep away from any moving part in the machine.
Never touch the spindles and /or the drills when the machine is operational.
6) Never superimpose wood pieces to be worked. Always bore one piece at a time, after having adjusted the
machine correctly.
3. OPERATIVE NOTES
4. DESCRIPTION OF THE MACHINE
Our Boring Machines have been manufactured to make a series of holes at a fixed 32-mm distance between
centres on wooden pieces (with maximum precision).
The pieces to be bored are fed by the operator, who places them on the machine table. The operator will first
carry out the required adjustments by pressing the control pedal. He will then lock the pieces into place with the
relevant hold down clamps and will start boring operations.
The following parts make up the machine:

A steel frame

Spindlehead unit with transmission (rapid-attachment).

Hold down clamps unit to clamp the piece to be cut in a vertical position.

Pneumatic system for head positioning and head feed.

Crank mechanism to adjust spindles distance equipped with mechanical counter and device to adjust hole
depth from 0 mm to 100 mm.

Rapid head-positioning device and head depth-adjustment device

Electric Power plant complying with standards.
4.1 APPLICABLE TOOLS
Drills for quick change spindles, 10 mm O. D. and 20 mm length shank ( Fig. A )
Drills up to 35 mm O. D. can be used ( Fig. B )
85 mm max useful length (connection excluded)
WOODWOORKING MACHINES CAN BE DANGEROUS
Fig. A Fig. B
ANY ADULTERATION OR REMOVAL OF SAFETY PROTECTION DEVICES CAN CAUSE SE-
VERE DAMAGE. ANY REMOVAL, EXCLUSION OR MODIFICATION OF THESE DEVICES IS
STRICTLY FORBIDDEN. YOU MUST VERIFY AND GUARANTEE THE PERFECT RUNNING OF
SAFETY DEVICES BY MEANS OF PERIODIC CHECKS. ANY DEFECT OR PROBABLE DRAW-
BACK MUST BE IMMEDIATELY RESOLVED.
Page
5