Maggi 16430201, Original Use And Maintenance Manual

Page: 11 / 56

6. SAFETY PROTECTIONS DEVICES AND ADHESIVE WARNING
The main risk is due to the revolving drills. To reduce this risk to the minimum, our machines have been
equipped with the following safety devices:
1) Emergency Pushbutton
It is located on the control board in the front part of the machine. When it is pressed, all machine movements
are halted immediately.
2) Set of Plates
They contain an accurate description of safety precautions and indications on how to operate the machine cor-
rectly and make it possible to identify the machine parts. One of these plates contains the identification data
and the serial number of the machine itself.
3) Side Protections
They prevent the operator from inserting his/her hands accidentally into the machine when the spindlehead is
moving.
4) Safety hold down clamps (patented)
They remain either on the machine table surface or on the already positioned piece to be worked, thus pre-
venting the operator from accidentally placing his/her hands under one of them.
5) EL Safety Device
No-return coil to prevent accidental starting of the machine.
CAUTION SYMBOL: ALL OPERATIONS MARKED WITH THIS SYMBOL
ARE DANGEROUS FOR THE OPERATOR. AS A RESULT THE OPERATOR
MUST PAY THE GREATEST ATTENTION WHILE CARRYING THEM OUT.
Page
7
WARNING SYMBOL
ALL THE OPERATIONS HIGHLIGHTED WITH THIS
SYMBOL ARE DANGEROUS TO THE OPERATOR;
PLEASE BE VERY CAREFUL IN DOING THESE OP-