Magene Left Crank Power Meter, Quick Start Manual

Page: 9 / 24

Please refer to the following if you have any questions in the process of using Magene Power Meter.
1.Check to see if activation has been performed
2.Check whether the bike computer or software has been connected
3.If the connection cannot be made, please replace the battery
Do zero offset calibration by your bike computer or Magene Utility
Keep the Magene Power Meter steady than make sure that the left crank is
pointing straight at the ground. Try again.
Magene Power Meter
1.Reinstall the left crank power meter battery
2.Power data display is not supported by bike computer or software
3.ANT+ device malfunctioned or Bluetooth was not enabled
1.Use the Magene Utility to check if the right side is connected. After static setting
the crank 1 min,don’t touch it. Rotate the crank to see if the connection state is
restored. if not, check the battery power (or replace the battery).