Magene Left Crank Power Meter, Quick Start Manual

Page: 6 / 24

Zero offset calibration will calibrate the power meter to 0 power when at rest.
When calibrating, please turn the left crank in the vertical ground down state and
use ANT+ Device or MAGENE UTILITY for calibration.
Magene Power Meter wirelessly transmits ride information to a bike computer or
receiver that support ANT+ or Bluetooth.
Magene Power Meter logs the following information as you ride.
Power Cadence Remaining Battery Capacity
This product transmits the following information wirelessly to cycle computers or
receivers that support ANT+ or Bluetooth LE connections.
When you discover the power meter is unable to make connections to any device
the battery may be exhausted. Try replacing the battery at this time.
7.1.1 Rotate the battery cover counter-clock-wise to the unlocked position to open
the battery compartment.
7.1.2 Remove the depleted CR2032 battery nothing the orientation. Install the new
in the same orientation with the positive pole inside the battery cover.