Magene Left Crank Power Meter, Quick Start Manual

Page: 5 / 24

If step 4 cannot search for the power meter, please sit around the Magene
Power Meter 1min and rotate the crank for a few weeks, at which time Bluetooth
enters the broadcast state and can be connected.
If activation fails, click return, enter the device search list, and reactivate.
Magene Power Meter can be connected to power device after activation.
Magene Power Meter is a Bluetooth and ANT+ dual-protocol power meter
that is compatible with ANT+ and Bluetooth devices that support the standardized
power meter protocol. Using this protocol the power meter’s measured data can be
viewed and recorded.
Typically
，
most bike computers can search for and add power meter equipment
in the settings through the settings>sensors>new>sensor>power meter.
When searching for the Magene Power Meter
，
step on the pedal connected to
the power meter crank so that the power meter can detect the torque therefore
waking up the power meter from Sleep mode
，
start the Bluetooth or ANT+ signal
broadcast and wait for a device to connect.
If there are multiple power meters in the current environment
，
you need to identify
your power meter by ANT+ ID. For ANT+ ID
，
please refer to step 3.4 for the
identification method.