Magellan Triton Triton 400 User Manual Download

Page: 61 / 61

Media

Media

Before using any of the media options you need install an optional SD card in the SD card slot located
on the right side of the Magellan Triton.

Browsing Photographs

Press

MENU

Select

View

Select

Media

Select the Sort button at the top to choose how the images will be sorted – by date, distance

or name. (Note: The Sort button is not active unless there are images available on the SD
card.)

Select an image to display the image in full screen.

Pressing the up and down arrows while viewing a photograph will rotate the image between

portrait and landscape modes.

Use the Left and Right Arrow keypad to step through the saved photos.

Press

ESC

to return to the

Browse Photos

list.

Press

+ ZOOM

to switch between List and Grid View to change how the images are

displayed.

Press

ESC

to exit

Browse Photographs

Summary of Contents for Triton Triton 400






























































Search results

Summary of Contents for Triton Triton 400

Reviews:

Related manuals for Triton Triton 400

Brands by name

Popular brands

Magellan Triton Triton 400, User Manual

Search results

Summary of Contents for Triton Triton 400

Reviews:

Related manuals for Triton Triton 400

Brands by name

Popular brands