Editing a Route. Any multileg route can be edited by adding a leg. This is done by
inserting a landmark between the "from" and "to" landmarks of an existing leg,
which has the effect of dividing an existing leg into two legs.
Press GOTO, LEFT ARROW (and another LEFT ARROW if necessary). High-
light the route you want to edit and press ENTER, then highlight "EDIT" and
press ENTER.
Decide where you want to put the new land-
mark; between which landmarks already in
the route will the new one be inserted? Press
the UP/DOWN ARROWs until both of the
existing landmarks are displayed. Press EN-
TER.
Now press the DOWN ARROW to view the
next leg. The new leg has been added that
starts at the "new" landmark and ends at
the old TO landmark.
Clearing Leg. Another way to change an existing route is to delete any leg. You will
now clear the leg you just added, returning the route to its original configuration.
First, you must display the route. Press GOTO,
LEFT ARROW. If the route you want is not
active, highlight in the Route Menu and press
ENTER, then highlight "EDIT" and press EN-
TER. Use the UP/DOWN ARROWs to display
the leg you want to remove.
Press CLEAR. Press CLEAR again to delete the
leg, or press any function key to exit without
deleting.
Using Your Magellan Receiver
37
A blank appears at the TO landmark. Use the
RIGHT/LEFT ARROWs or Smart Scroll to dis-
play a new landmark. Press ENTER when the
new landmark is displayed.
Summary of Contents for Trailblazer XL
