manualshive.com logo in svg

Magellan Trailblazer XL, Reference Manual

Share
Download
Magellan Trailblazer XL Reference Manual Download Page 47

38 

Using Your Magellan Receiver 

Reversing a Route. Reverse Route allows you to take an existing route and reverse

the order of the landmarks  used to create it. For example, if you were to set a route
that went from point A to point B and ended at point C, Reverse Route would change
the route to go from point C to point B and end at point A.

To access Reverse Route, press GOTO, LEFT ARROW (press the LEFT ARROW
twice if necessary), then highlight the route you want to reverse and press
ENTER. Next, highlight "REVERSE ROUTE" and press ENTER again.

Backtrack. Another type of route is the Backtrack route. Backtrack uses the Last Loca-
tion fixes in the buffer (up to 25 of the most recent Last Locations) to create a route
that "backtracks" the course you took. This way you could leave point A, travel for a
couple of hours, then set a backtrack route and let the receiver guide you back to
point A following the same path you just took.

Press GOTO, LEFT ARROW (and another LEFT ARROW if necessary). High-
light the route number you want to use and press ENTER.  Highlight "BACK-
TRACK" and press ENTER again.

Summary of Contents for Trailblazer XL



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands