manualshive.com logo in svg

Magellan Trailblazer XL, Reference Manual

Share
Download
Magellan Trailblazer XL Reference Manual Download Page 60

lt is possible to use rechargeable batteries, but there are a couple of things you should 

be aware of when using them. Commercially available NiCad batteries typically have 
poor power performance after repeated use, and rechargeable alkaline batteries main-

tain only 50% of the useful life of standard alkaline batteries. Rechargeables also 

have a very sudden power drop at the end of their charge. The drop may be so 
sudden that the battery warning is not displayed, although memory will be main-

tained for a while. 

External Power.  The Trailblazer XL can also be operated from an external DC power 
source. This requires the Power/Data Cable that is included with the optional mount- 

General Maintenance 

51 

POWER SOURCES

The Trailblazer XL is powered by three AA batteries. lt can also be powered from an

external DC power source by using the optional Power/Data Cable.

Batteries.  We suggest using AA alkaline batteries to power the receiver. (Magellan

Systems recommends Eveready Energizer

TM

 batteries.) Alkaline batteries will power

the receiver for 5 hours or more of continuous Operation.

To install the batteries, hold the

receiver as shown in the illustra-

tion at the right. At the same
time, press down slightly on the

battery compartment cover and
pull the cover toward you. (The
compartment is sealed against

moisture, and will not move eas-
ily.) Insert batteries as indicated
in the compartment and replace

the cover.

When the battery power level drops, a warning message (LOW BAT) will appear on all
displays. The receiver should still have sufficient power to operate for up to 30 minutes
if alkaline batteries are being used.

When the batteries no longer hold enough power to operate the receiver, the receiver
turns itself off. The batteries will still be able to maintain the memory for a time, but
the receiver can be operated only if external power is supplied or if fresh batteries are
installed.

Summary of Contents for Trailblazer XL



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands