!
Warning - danger or risk of injury
!
Important note or statement
Please read these instructions carefully before using the AK6000 control unit
Do not
use the boiler until completely installed
When the boiler is
ON
you can not do the following
o
remove enclosure from the electrical parts - for example electronic modules, fans, sensors,
thermostat etc.
o
replace the fuses
o
repair damaged cables and modules etc.
Before removing the cover of the electrical parts or other apliances is important to disconect the
power cord from the AC outlet.
Do not operate the boiler unless all enclosure panels are properly in place
In case of failure detection or damaging any part is important
o
do not touch any part of boiler
o
immediately disconect boiler out of the AC outlet
o
refer all servicing to qualified service personnel
This appliance is not suitable for person which were not instructed by the responsible operator for
using the appliance or whose have physical and other disability which prevents from the safe
operation on the apliances
!
Improper connection of the equipment can result in risk of electric shock. Check with qualified
electrician or service representative if you are in doubt whether the boiler is properly
Safety Instructions
Important Symbols
