-20-
2.4
Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Workplace-related emission value
Idling
102 dB (A)
91 dB (A)
Machining
103 dB (A)
92 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.5
Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6
Scope of supply
Portable circular saw KSP 40 Flexistem complete with:
1 carbide tipped circular saw blade Ø 120 mm, 24 teeth
1 riving knife/splitter (thickness 1.2 mm/3/64 in.)
1 hose connector
1 parallel stop
1 service tool in bracket on the machine
1 carrying case Max
1 operating manual
1 folder "Safety instructions"
2 clamping claws
1 FLEXI rail FX 140 for cutting length max. 140 cm ( 55 in. )
Cross-cuting system KSS 300 complete with:
1 carbide-tipped circular saw blade Ø 120 mm ( 4 ¾ in. ) , 40 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 hose connector
1 parallel guide fence
1 service tool in bracket on the machine
1 carrying case max
1 operating manual
1 folder “Safety Instructions”
2 clamping claws on item No. 916702, 916730, 916731, 916732, 916735
1 FLEXI rail FX 140 for cutting length max. 140 cm ( 55 in. ) on item No. 916702, 916730, 916731, 916732,
916735
