Maeda MC-174CRM, Operation Manual

Page: 258 / 276

6-38
8. OPERATION
• Never attempt to disassemble or modify the Transmitter or Receiver, which may cause an
electrical shock or a fire.
• Avoid making an impact to the Transmitter by dropping or hitting. A damaged part of the
enclosure allows water to enter inside that can cause trouble or failures and may result in a
serious hazard, such as a malfunction or electrical shock.
In the event of dropping and damage, send the Transmitter to us or our agents for services.
• Never water-wash the Transmitter or Receiver; that allows water to enter inside and can cause
trouble or failures and may result in a serious hazard, such as a malfunction or electrical
shock.
• Both remote control operation and manual operation at the same time are not allowed.
That may cause un-expected behavior of the Crane and result in a serious hazard. The Crane
must be operated by only one method. (Manual operation is not available, when the remote
control is active.)
• Prior to starting the remote control operations, always conduct inspections of both the
Transmitter and Receiver, in accordance with “INTERACTIVE REMOTE CONTROL 7. Checking
before Operation
”.
8.1 CAUTIONS BEFORE OPERATION
1. So that dropping the Transmitter is prevented, hook one end of
the hook belt (16) to the Transmitter and attach another end to
the operator‟s waist belt & etc.
2. Always conduct inspections of both the Transmitter and
Receiver, in accordance with “REMOTE CONTROL 7. Checking
Before Operation
”.
3. Make sure that the receptacles (14) at the both ends of the
connection cable are secured to both the Transmitter and
Receiver, respectively.
NOTES
• When it is required to change the initial values of settings such as the contrast of the Transmitter LCD
screen, the light, or the OFF timer, first
switch to “A MODE” for adjustment.
• In the event that the remote control operation is discontinued for the length of the “Auto shut -OFF
time” or longer, during the crane operation, the Transmitter power will be automatically cut. To resume
the remote control operation, turn ON the Transmitter and set each item of the operation mode again.