13
To change settings, remove the Philips screw on the front of the CD-6. Pull off the front cover of the unit.
Selecting Default Configuration – “
dEF”
To select the Default Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then push the
Enter
button to enter the Con menu. The
first
selection is the “dEF” or Default setting. Push
Enter
. If it is already in Default
configuration, there will be no action. If it is not already in Default configuration, “nO” will be displayed. Push
Next
to change it to “YES”
(flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to “dEF” in the con menu. Push
Next
until “End”
is displayed then push
Enter
to get back to normal operation.
Selecting Power Up Test Option – “PUt”
To select the
Power Up Test
Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then
push the
Enter
button to enter the Con menu. Then push the
Next
button to get to
the second selection
“PUt” or
Power Up Test
setting. Push
Enter
. If the test is “On” push
Next
to turn it “OFF” (flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to “PUt” in the Con menu. Push
Next
until “End” is displayed then push
Enter
to get back to normal operation.
Selecting Display Option – “dSP”
To select the Display Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then push the
Enter
button to enter the Con menu. Then push the
Next
button to get to
the third selection
“dSP” or Display setting. Push
Enter
. If
the display is “On” push
Next
to turn it “OFF” (flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to
“dSP” in the Con menu. Push
Next
until “End” is displayed then push
Enter
to get back to normal operation.
