90
Chapter 5: The NetConnection Debugger
The following table describes the information the NetConnection Debugger displays about
specific event types.
Event type
Information displayed by the debugger
client
Activity information sent from the client. The default value is
true
.
For detailed information on client debug events, see
“Client event
messages” on page 92
.
You can selectively enable and disable the following subcategories of
client events.
trace
Client Connection trace events. If client trace reporting is enabled, the
NetConnection Debugger displays the output of
Connection.trace()
and
NetDebug.trace()
methods. The default value is
true
.
http
Client Connection events that communicate with the remote source using
HTTP. These events include connecting to the server, and Flash
Remoting service calls and the returned results. The default value is
true
.
recordset
Events associated with the delivery of pageable record set data to the
client. These events occur only if the record set is pageable.The default
value is
true
.
rtmp
Client Connection events that communicate with the remote server using
Real-Time Messaging Protocol (RTMP). Communication with the Flash
Communication Server uses RTMP. Flash Remoting does not use
RTMP. The default value is
true
.
app_server
Information about events on the application server. This category
includes activities reported by the server itself and Flash Remoting
gateway activities.
For detailed information on server debug events, see
“Application server
event messages” on page 93
.
You can selectively enable and disable the following subcategories of
app_server events. The default value is
true
.
trace
Server trace events. The default value is
true
.
(This event type is not used currently.)
error
Server error events. These include any errors generated during the
execution of the Flash Remoting gateway or adapters. The default value
is
true
.
httpheaders
Server HTTP header events. When enabled, the NetConnection
Debugger reports a server HTTP header event for each HTTP request.
The default value is
false.
amfheaders
Action Message Format (AMF) header events. When enabled, the
NetConnection Debugger reports a server AMF request header event
and a server AMF response header event for each AMF request and
response. A single AMF request can include multiple service function
calls. The default value is
false
.
amf
Server AMF events. When enabled, the NetConnection Debugger
reports a server AMF method call event and a server AMF method
response event for each service function call and response. The default
value is
false
.
