22
23
1
2
3
4
LOCKS
IN THE
SASH
LOCKS
IN THE
SASH
!
NOTE
2 cables must be connected to each
INSTINCT component in the door leaf
to ensure the proper functioning of the
system.
1
Remove the seal.
2
Run the two cables through the seal.
3
Plug the cables into the lock.
4
Reattach the seal to the lock.
Connect all INSTINCT Guard / Guard+ (except
the top / last one) according to the following
procedure and position them in the milled holes.
Work steps in the door leaf
5. Connection of INSTINCT Guard / Guard+
Variant A
Termination cable
Variant B
Termination cable with acoustic module
Connect an INSTINCT system cable to the upper /
last INSTINCT Guard / Guard+. A termination cable
must be connected to the second port.
Work steps in the door leaf
6. Connection of INSTINCT GUARD / Guard+ and INSTINCT termination cable
