8
9
2
1
LOCKS
IN THE
FRAME
LOCKS
IN THE
FRAME
Work steps in the door frame
1. Milling checks
!
PAY ATTENTION TO THE SYSTEM FOLDER
For the positioning of the individual components
and the drilling and milling patterns, the
specifications of the profile-specific system
folder must be observed.
Check the milling and, if necessary, remove
any burr to avoid damaging the cables.
Work steps in the door frame
2. Connection of INSTINCT system cable and Bluetooth module
!
NOTES ON CONNECTING AND
DISCONNECTING THE PLUGS
Connect the plug to the socket until the plug
snaps into place.
By pressing the protruding tab and pulling out
the plug at the same time, the connection is
released again.
1
Feed the INSTINCT system cable for frame-side
assembly 6000 mm into the hole provided for this
purpose.
2
When using an INSTINCT Bluetooth module, it must be
placed and wired at the recommended positions (see
system folder) before the INSTINCT Guard and Guard+
are wired.
