10
11
1
2
3
4
LOCKS
IN THE
FRAME
LOCKS
IN THE
FRAME
Feed all system cables into the corresponding millings
according to the system folder.
!
NOTES
Each INSTINCT component in the door frame
must be connected to 2 cables to ensure the
proper functioning of the system.
1
Remove the seal.
2
Run the two cables through the seal.
3
Plug the cables into the lock.
4
Reattach the seal to the lock.
Connect all INSTINCT Guard / Guard+ (except the top / last
one) according to the following procedure and position them
in the milled holes.
Work steps in the door frame
3. Cable installation
Work steps in the door frame
4. Connection of INSTINCT Guard / Guard+
