40
41
COMMISSIONING
WITHOUT
TEST
KIT
COMMISSIONING
WITHOUT
TEST
KIT
Commissioning without Test Kit
Commissioning without Test Kit
6. After commissioning the system, the hooks of the INSTINCT Guard / Guard+ extend automatically.
Positioning Reference
7. Manually operate the locking hooks of all INSTINCT Guard / Guard+ to check proper functionality.
Thereafter, the hooks must be unlocked again immediately by the motor.
8. Close the door. The locks must run into the striker plates without any noise. Check the proper
functioning in day release mode and adjust the striker plate if necessary. In addition, you can readjust
the door hinges according to the assembly instructions of the door hinge manufacturer.
!
NOTE ON PIN POSITION
If noise occurs, the pin position can be
adjusted manually. Please refer to the
instructions on page 28.
!
CONTROL SIGNAL - CLOSE
If an acoustic module
has been installed,
the following signal
is heard:
Tone
Time
medium
