Mack M359, Manual

Page: 200 / 332

INFOTAINMENT
RADIO
Radio System Settings
Audio Controls Menu
Clock
To adjust the time in the radio, press the
knob to show the Audio Control Menu.
Rotate the knob until the Clock is shown
on the display and press the knob to
enter the Clock Menu.
Once in the Clock Menu you can select
12 Hour or 24 Hour format by rotating
the knob and pressing it to confirm.
Finally after the format configuration and
confirmation, adjust the time settings
and confirm the changes by pressing the
Knob.
Alarm
To set the Alarm press, enter the Audio
Control Menu, select Alarm and press
the knob. Once in the Alarm Menu,
change the ALARM ON/OFF by rotating
the knob and pressing the knob to
confirm the selection. When the user
selects ALARM ON, the Alarm Icon will
be set to ON and the following
configuration options will be shown:
• TIME: The hour digits for the alarm
time will begin to flash. The format
will be the same as you set for the
clock (12 or 24 hour mode). Change
by rotating the knob and confirm the
hour and minutes by pressing the
knob.
• SET TONE or SET MUSIC: Change
between SET TONE or SET MUSIC
by rotating the knob and pressing
the knob.
• VOLUME: For Tone change between
Low, Mid and High. For Music adjust
from 0 to 30.
• Turning the Alarm Off: When the
alarm is triggered, short press the
preset 3 button. If you do not turn
the alarm off, it will automatically
shut off after 63 minutes.
• Activating Snooze: To use SNOOZE,
press any button for less than 2
seconds when the alarm sounds,
except Preset 3 button. SNOOZE will
appear for 3 seconds and the alarm
will be postponed for 9 minutes.
User Menu
The User Menu is shown when the
Volume knob is pressed for more than 2
seconds. In this menu the user can
configure the following options:
• Speakers (SPEAKERS)
• Seek Sensitivity (SEEK SEN)
• Tune Configuration (TUNE CFG)
• Playback Configuration (PLBK CFG)
• Dimming (DIMMING)
• Category Enable/Disable (CAT E/D)
• HUE Adjustment (HUE ADJ)
• Speed Dependent Volume
(SPEEDDV)
Playback Configuration (PLBK CFG):
This option is used to configure the
Next/Prev Button for the long press
functionality (between FF/FR and Folder
Up/ Down).The display will show the
current selected option SEEK (folder Up/
Down) or FAST F/F. Rotate the knob to
change between SEEK or FAST F/F,
press the Knob to select the desired
option. This option is only available
when radio is playing CD, USB or iPod
Mode.
Category Enable/Disable (CAT/E/D): The
display will show CAT ENABLE or CAT
DISABLE depending on the current
selection. Rotate the knob to change
between the two options and press the
Knob to confirm the selection. This
option is only available in SXM Mode.
Speed Dependent Volume (SPEEDDV):
User can select between
OFF/LOW/MID/HIGH settings. Volume
will be increased accordingly in the radio
as vehicle speed increases/decreases.
190
X Publication_PC28