Mack CSM 2010, Operator'S Handbook Manual

Page: 78 / 232

70 INSTRUMENTS AND CONTROLS
Stalk Switch ( Co-Pilot® Only)
The stalk switch (Co-Pilot® only) is located on the right side of the steering column and
contains three depressible buttons:
ESC , Enter (
↵
) and Up & Down . The stalk switch is
used to access, navigate, view and change information available in the driver information
display (Co-Pilot® display).
The following illustration shows the stalk switch.
C0032686
1. ESC (Escape) 3. Up & Down
2.
↵
(Enter)
Navigation of Co-Pilot® Menu
ESC BUTTON
The
ESC
(Escape) button on the stalk switch takes the Co-Pilot® back to the previous
screen or level in the menu.
Note: The ESC button does not function at Start Up or when the vehicle is moving. The
ESC button is used only when the vehicle is stationary.
ENTER (
↵ ↵ ↵
) BUTTON
The Enter (
↵
) button on the stalk switch selects the highlighted menu items during menu
selection. During Start Up and when moving the vehicle, the
Enter
(
↵
) button is also
used to confirm or acknowledge a pop-up screen. Sometimes, the Enter (
↵
) button takes
the Co-Pilot® back to the previous screen.