182 Mack, Emissions Solution
WARNING
When a regeneration is in process, the temperature of the exhaust will be elevated.
DO NOT park the vehicle with the exhaust outlet under low hanging overhead
flammable objects such as trees, awnings, etc., that could be damaged by elevated
exhaust temperatures. DO NOT attempt to regenerate inside a garage or enclosed
area if the tail pipe is attached to an exhaust ventilation system as the hose material
may not be rated for the high temperature.
2. Press and hold the top part of the DPF Smart switch momentarily to initiate
the regeneration.
3. During regeneration, the icons on the switch will shut off. The HEST indicator on
the instrument cluster will light up to notify of high exhaust temperatures.
4. For Aftertreatment DPF filter systems, the engine speed may ramp as high as
1,100 rpm.
5. Parked regeneration can take between 45 and 90 minutes to complete.
6. After regeneration has completed and the exhaust temperature has returned to
normal, the HEST indicator will shut off.
7. To stop regeneration, press the switch down to the inhibit position (if equipped).
When the bottom of the switch is illuminated, regeneration is stopped. The switch
will remain locked in this position and the light will stay illuminated. The driver has
the option of stopping a regeneration if the vehicle is in an area where elevated
exhaust temperatures will pose a hazard (i.e., tunnel, under trees, in an area where
there is flammable material, etc.).
Note:
The HEST lamp will remain On if it comes On during the regeneration, and remain
On until the exhaust temperature returns to normal.
CAUTION
Failure to perform a regeneration in a timely manner after notification may result in
engine derate, a clogged DPF, damage to the DPF and engine shutdown.
Summary of Contents for CSM 2010
