Mack CSM 2010, Operator'S Handbook Manual

Page: 63 / 232

INSTRUMENTS AND CONTROLS 55
52. Radio Box – See separate owner’s manual on radio instruction.
53. Microphone – Used for hand free communication
54. Cab Climate Control – See instructions under Cab Climate Control listed in
the Instrument and Controls Section of this manual.
55. DPF Smart Switch (Cummins) – This is a three-position switch where the
middle position is neutral.
•
Upper Position – Regeneration position
•
Middle Position – Neutral Position
•
Down Position – Inhibit Position
55. Optional Switch ( m DRIVE) – Refer to “Function of Optional Switches”, page 58
56. Power Divider Lockout Switch ( m DRIVE)
57. Load Light Switch ( m DRIVE) – Refer to “Function of Optional Switches”,
page 58
58. Differental Lockout Switch ( m DRIVE –
59. Parking Brake Valve – Yellow diamond-shaped knob. Pull to apply. Push to
release. Applies tractor parking brakes and trailer brakes, if equipped.
60. Optional Switch – Refer to “Function of Optional Switches”, page 58
61. Trailer Air Supply Valve – Red octagonally-shaped knob. Pull to apply trailer
emergency brakes. Push to pressurize the trailer air reservoir, releasing the trailer
emergency brakes.
Note: The trailer air supply valve should NOT be used for parking.
62. Optional Switch – Refer to “Function of Optional Switches”, page 58
63. Suspension Height Switch ( m DRIVE) – Refer to “Function of Optional
Switches”, page 58
64. Optional Switch – Refer to “Function of Optional Switches”, page 58
65. Optional Switch – Refer to “Function of Optional Switches”, page 58
66. Optional Switch (Cummins) – Refer to “Function of Optional Switches”,
page 58
66. Driving Light Switch ( m DRIVE) – Turns on the driving lights.
67. Speed Control Switch – – This is a V-MAC® switch; refer to the V-MAC®
IV Vehicle Management and Control with Co-Pilot® Display Operator’s Guide for
more information
68. Wiper Switch – manually turns on wipers.
69. Optional Switch – Refer to “Function of Optional Switches”, page 58