·
44
·
·
45
·
Chapter 7 Detailed Explanations of Functional Parameters
For S900 E series inverter, you can use parameter “F.00” to set
the main display data. It’s also possible to monitor the data directly
through the parameters “P001~P018”.
You may monitor the data by pressing the switching key as shown
in below table:
Procedure
Press key
Display
Explanation
1
Turn on power
F50.0
STOP
FWD
①
Inverter is in standby
mode.
②
The keypad displays
frequency setting.
FREE light is on,
which means that
the keypad is
displaying frequency
setting
2
Press
F50.0
RUN
FWD
Start inverter
①
Inverter is in running
and RUN light is on.
②
The image displays
frequency setting.
Forward light is on;
inverter is in Forward
state.
3
Press
for
once
H50.0
RUN
FWD
Switch display; stop
switching when actual
output frequency is
displayed.
Inverter is in Forward
running state.
①
The actual output
frequency is 50.0Hz.
4
Press
for
once
A00.0
STOP
FWD
Switch display; stop
switching when actual
output current is
displayed.
①
The actual current
output is 0A
5
Press
for
once
Frd
RUN
FWD
Display running state.