RapidPath supports a variety of homing methods. The exact methods available will depend on the capabilities of your
drives.
The home status of any axis can be seen on the main page. If an axis is not homed, the letter by it's position DRO will
flash red and yellow. If an axis is homed, the letter will turn black. All motors on an axis must succeed at homing for an
axis to report homed.
Axes can be homed individually or all together in their defined order. Each axis will follow the same general sequence
for homing.
1. Each motor on the axis will complete it's homing action as configured. Each method of homing requires
different configuration needs.
2. The axis will wait for all motors to be done.
Homing
Units must be set up and accurate before doing any homing operations.
Home Status
General Homing Sequence
