Drive parameters are directly editable from the control software without any additional cables.
1. On the menu bar, click Configure -> Plugins -> RapidPath, then select the Drives tab.
2. Select the motor that you need to change parameters on by selecting it from the list on the left side.
3. Select the Drive Parameters tab.
On this page, you can view and edit all parameters on the drive. Edited parameters will be highlighted in green. The
parameters can be saved to a file or loaded from a previous save.
At this point, axes should have correct motion with accurate units and reasonable speeds and accelerations.
The machine has not been homed and limits have not been set up. Use caution while moving the machine.
Drive Parameters
This file format is not compatible with parameter files from other software.
