background image

 

DESCRIPTION 

SMALL BASEBALL-SHAPED SCOREBOARD 

 

 

NOTE TO INSTALLERS: PLEASE RETURN THIS MANUAL TO THE INDIVIDUAL IN CHARGE OF 
THE SCOREBOARD UPON COMPLETION OF INSTALLATION. 

 

 

The  scoreboard  and  all  accompanying  accessories  have  been  carefully  inspected  and  tested 

before leaving the  factory.    However, it is possible for damage to have occurred during shipping so 
we ask that you inspect all shipping containers upon arrival for damage and ensure that you have all 
of the parts listed below. If you find that damage has occurred during shipping, 

DO NOT

 refuse the 

shipment.  Instead,  accept  the  shipment  from  the  carrier,  follow  the  instructions  for  filing  a  freight 
damage claim found below, and notify the manufacturer immediately. 

 

 

THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS: 

 

 

ITEMS IN

 

LARGE PACKAGE(S) 

(1)   

7’ Diameter Baseball/Softball Scoreboard  

(2)  Criss-Cross Bat Sport Panels with Mounting Hardware 
(1)  Circular Sponsor Panel with Mounting Hardware 

      

 ITEMS IN ACCESSORY BAG 

(1)  LCD keyboard controller with keypad inserts (built in battery optional) 
(1)  12-volt DC wall transformer   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

(1)  Keyboard carrying case  
(1)  CD ROM (including installation, operation, maintenance, warranty, and support information) 

Cable-controlled systems (standard): 

 

 

(1)  20-ft. control cable 
(1)  Junction box cover with built-in 5-pin din socket 
(1)  Customer-specified length of control cable  

Wireless systems (optional): 

                    (1)  Wireless transmitter with interface cable attached 
                    (1)  Mounting bracket for transmitter       

OPTIONAL PARTS 

 

 

 

Wireless remote control system 

 
 

INSTRUCTIONS FOR REPORTING SHIPPING DAMAGE 

 

Shipping damage must be noted at the time of delivery.  Consignee must note “DAMAGED” on 
the Delivery Receipt Form.  Please make notations of the type of damage to the freight and to the 
packaging.  Ask the delivery driver to call the local terminal and report immediately.  The shipper 
is 

not responsible 

for the  shipments that are not signed for as damaged upon arrival. Please 

contact the manufacturer immediately to report the damage. The shipper is responsible for filing 
the claim, unless shipped 3RD Party.  

 

If damage is discovered after delivery, call the delivery company to report the concealed damage 
and please call the manufacturer immediately to report. Concealed damage must be reported 
within 5 days after delivery date. If the damages are found after this time, the manufacturer will not 
be responsible. 

 

                                                                                              

 

Summary of Contents for Legacy Series

















Reviews: