background image

 

 

IMPORTANT

 

   Warranty Activation/Installation & Completion Sign Off Sheet 

 
NOTE: This sheet must be completely filled out and returned/faxed (270) 753-3773 to Scoreboard 
Service Company before your warranty can be activated. 
 
Your Serial Number _______________________________________ 
 
Your Model Number _______________________________________ 
 
Date Purchased       _______________________________________ 
 
Sales Agent             _______________________________________ 
 
Person Authorizing Purchase (title) ____________________________ 
 
Date Installation Completed   _________________________________ 
 
Company or Person Responsible  
For Installation (address/phone number) ________________________ 
 
 
 
This document confirms that the installation for the Baseball Scoreboard has been completed. All 
structural, wiring, and power requirements have been met. This unit has been tested in scoring 
and diagnostic modes, ensuring the functionally of the unit. 
 
 
________________________________ 
 
Scoring/timing equipment responsible party 
 
 
________________________________ 
 
Installer 
  
 
So that we may better serve you, please have this information available in the event you need to 
call technical support. Customer Service: 1-800-411-3136 

 

Summary of Contents for Legacy Series

















Reviews: