MacDonald Steel Limited
BREWERY SYSTEMS DIVISION
9
REV 00
MACHINE SETUP
GLASS BOTTLE HOLDERS
The filler comes equipped with a two piece plastic base (puck) to hold glass bottles. The bottom piece
can be used to hold one size bottle and the second (upper) piece will hold a smaller, second size bottle.
The base(s) must be in place to fill glass bottles, do not place a bottle directly on the metal.
Two piece glass bottle base small bottle large bottle
HEAD TULIPS
The filling head has a removable tulip, which is used to center and seal the bottle. The tulip is comprised
of three parts; an upper piece which seals against the fill head, a inner rubber seal and a lower piece
which acts as a guide to center the bottle. The mouth of the bottle must pass through the lower piece to
rest against the rubber seal. On some larger bottles such as growlers the lower tulip piece must be
removed in order to seal the bottle during the fill cycle. The lower part of the tulip is threaded; to remove
it, simply grasp the piece and twist counterclockwise.
