23
4
For permanent fitment, bring the
electrical harness into the cab in the
desired manner. Sheath the 4 Molex
plugs if feeding through a narrow
cavity, to protect from possible
catchment and damage.
Plug the longer portion of the
Electrical Wiring Harness, Part 11B,
into the Voltage Converter Box, Part
11C. Connections are colour coded
with cable ties.
Take the other ends to the header
and front connection point.
5
Fasten the Harness Plug Mount, Part
11F, to the header front, onto the
junction box cover with existing
fasteners.
Fasten the barrel plug (header front
portion of the harness) to the mount.
Plug the longer portion of Harness
into the shorter portion at the header
and header front connection point.
6
Plug the outlet cables of the Remote
Controller, Part 11D, into the Voltage
Converter, Part 11C, inlet ports.
Connections are colour coded with
cable ties.
7
Fasten electrical harness to the
header in locations clear of moving
parts and potential catchment points,
using cable ties, to prevent wear and
damage to the harness. Excess
harness length, roll up and fasten in
an appropriate location.
Ensure no portions of the harness are
under tension or sagging in any
locations.