13
9
For 40ft, the left and right end
bracket braces, Parts 1C and 2C, are
supplied overlength. For each brace,
drill the bolt hole in the required
location for fastening to the header
front and cut off excess length.
Touch up end of brace with black
paint.
Fasten to the header front with the
fasteners supplied loose once the
paint has dried.
AUGER BARREL ASSEMBLY
10
Fasten the Hydraulic Motor
Subassembly, Part 4, to the outer
face of Part 1A.
If the locking rod of Part 1A is too
long and extends over the hydraulic
motor inlet, a shorter version has
been supplied loose for replacement.