PRE-DELIVERY CHECKS
Form # 169078
Model Year - 2009
34
f. Open shield on header LH side.
g.
Sickle drive belt
(J)
should deflect 0.55 inch
(14 mm) when a load of 5-6.5 lbf (22-30 N) is
applied at mid-span).
h.
Auger drive chain (K)
deflection should be ¼
inch (6 mm).
i.
Auger drive belts
(L)
should deflect 3/16 in. (4
mm) when a load of 8-12 lbf (35-40 N) is applied
to each belt at mid-span.
j. Close shield.
k. Proceed to Section B, AUGER STRIPPER BAR
CLEARANCE.
III. A40-D DOUBLE KNIFE
a. Open shield on header RH side.
b.
Sickle drive timing belt
(M)
should deflect 0.55
inch (14 mm) when a load of 5-6.5 lbf (22-30 N)
is applied at mid-span).
c. Open shield on header LH side.
d.
Sickle drive timing belt
(N)
should deflect 0.55
inch (14 mm) when a load of 5-6.5 lbf (22-30 N)
is applied at mid-span).
e.
Sickle drive V-belts
(O)
should deflect 3/16 in.
(4 mm) when a load of 8-12 lbf (35-40 N) is
applied to each belt at mid-span.
f. Close shields.
O
N
A40-D
M
A40-D
J
K
A30-D
L
